Vodabond Ready Repair Filler Tube 200 Gr White

Ready Repair Filler; is an acrylic copolymer binder based, flexible, fiber reinforced, ready to use indoors and outdoors, fiber reinforced filler and surface correction putty prepared to close cracks, holes and roughnesses on walls and floors.
It is used as a general purpose filler for repairing cracks and holes on mineral based surfaces such as plasterboard, plaster, brick, gas concrete, especially on exterior walls or floors. The surface obtained is smooth and matt.
Easy to apply, dries quickly.
Can be painted over. Resistant against moisture and water after complete drying.
It does not crack with its fiber reinforced structure. Sanding can be done for polishing.

APPLICATION

The floor or surfaces for application must be dry and clean. Apply the ready repair filler with a spatula or steel trowel. Make sure that the surface and air temperature is above + 5°C during application.
Do not apply more than 3 mm thick in a single coat. Apply two coats when necessary and wait at least 24 hours between coats.

When your cargo is delivered, if there is a deformation in the package of the product or a situation that may damage the product, open the package with the cargo officer and check the condition of your products. If you see any damage to your products, ask the cargo officer to keep a record and do not receive the package. The products will be delivered to us by the cargo company and the products will be exchanged.